Product Description
Fast curing: 5-10 minutesEasy to apply
Can be used indoors and outdoors
Water resistant: suitable for continuous water exposure
Even cures under water!
Does not deform
No shrinkage: remains in original form
Chemical resistant
Grinding, drilling, sawing and painting possible after curing
WORKING CONDITIONS
Recommended application at temperatures between +15 °C and +25 °C.
PRELIMINARY SURFACE TREATMENT
The surface must be properly sanded and then cleaned and degreased.
TOOLS
A moist knife to cut off the required amount from the stick.
DURING USE
DIRECTIONS FOR USE
Cut the required Epoxy Repair with a damp knife from the rod (reinsert foil). Knead with your fingers until a homogeneous colour (dark gray) is obtained. If kneading is difficult, bring the rod at room temperature. Apply within 2 minutes after mixing and put into shape. Cut off excess mass with a knife. Remove fingerprints by rubbing with water or a damp cloth before curing starts.
PERSONAL SAFETY
Preferably, process with gloves. After use, wash hands immediately and thoroughly with soap and water
AFTER USE
STAINS/RESIDUE
Remove fingerprints by rubbing with water or a damp cloth before curing starts.
STORAGE CONDITIONS
Store in a dry, cool and frost free place.
